Application Instructions & Safety Information
Application Methods
- Garden Sprayer: Ideal for vertical and horizontal surfaces. Excess liquid should be brushed into the surface or wiped off with a clean cloth.
- Airless Sprayer: Best performed by an experienced applicator. Improper use can result in thin or uneven coatings, affecting performance. Wipe off excess with a sponge or clean cloth.
- Roller: Use a roller with a 1” or greater nap for horizontal surfaces. Vertical application is possible but not recommended; back rolling can improve penetration. Wipe off excess with a cloth or sponge.
- Brush: Highly effective for all surfaces. For optimal penetration, saturate the substrate with a good-quality, thick-bristle or cloth brush.
Surface Preparation
- Always apply to clean surfaces.
- Repair any cracks before application.
- Ensure new concrete is sufficiently cured before applying.
- Cover surrounding plants and objects to prevent overspray. If contact occurs, wash with water.
- Test on an inconspicuous spot before full application.
- Tightly secure the cap after storage of unused product.
Protection & Safety Measures
- Respiratory Protection: Not required
- Ventilation: Not necessary
- Protective Gloves: Any rubber glove
- Eye Protection: Chemical splash goggles or safety glasses
- Additional Protective Gear: Appropriate clothing or equipment
- Work/Hygiene Practices: Minimize contact and splashing; use in well-ventilated areas unless respiratory protection is worn
- Spill Handling: Use sponges or mops to contain and transfer liquid. Allow to evaporate or clean with soap and water. Solids are non-toxic.
- Waste Disposal: Dispose in regular trash.
- Handling & Storage: Avoid freezing and temperatures above 100°F.
Emergency & First Aid
- Eyes: Flush with water.
- Skin: Wash with soap and water.
- Ingestion: Do not induce vomiting; seek medical attention immediately.
- Fire Hazard: None. Non-flammable.
For detailed safety information, see the Safety Data Sheet [here].